Etude bibliographique de l'ordonnancement simultané des moyens de production et des ressources humaines

Auteurs

DOI :

https://doi.org/10.53102/2004.23.02.520

Mots-clés :

Ordonnance, Ressources humaines, Affectation des opérateurs, Durées opératoires variables

Résumé

Alors que de très nombreuses recherches portent sur
l'ordonnancement d'atelier, bien peu portent sur l'ordonnancement des ressources humaines et encore moins sur l'ordonnancement simultané des ordres
de production et des opérateurs. Si quelques travaux existent sur l'ordonnancement des ressources humaines en vue d'ajuster la capacité à la charge ou sur la définition fine du cycle de travail sur un poste, les manques sont
flagrants au niveau de l'ordonnancement. Ce travail met l'accent sur les nombreux manques dans ce domaine.

Références

Arditi, D.,. Tokdemir O.B, Suh K. (2001). Effect of learning on line balancing scheduling, International

Journal ofProject Management, 19, pp. 265-277.

Aykin T. (1996) Optimal shift scheduling with multiple break windows. Management science, 42(4):591-602.

Aykin, T. (2000). A comparative evaluation of modeling approaches to the labor shift scheduling problem, European Journal of Operational Research, Volume 125, Issue 2, pp. 381-397.

(4] Baker, K.R. (1974). Introduction to Sequencing and Scheduling, Wiley, New York. NY.

Baptiste, P. (2001). « L'ordonnancement d'atelier», dans « Performances Industrielle et gestion des flux », édition Hermes, ISBN 2-7462-0297-2, pp. 113-151.

Bartholdi J.J. (1981). A guaranted-accuracy round-off algorithm for cyclic scheduling and set covering. Operational Research, 29:501-510.

Billionnet, A. (1999). Integer programming to schedule a hierarchical workforce with variable demands. European journal ofoperational research 114, 105-114.

Blazewicz J., Ecker K., Schmidt G.et Weglarz J. (1993). Scheduling in computer and manufacturing systems. Ed Springer-Verlag, ISBN 3-540-55958-2.

Bourland, K.E,. Carl L. K. (1994). Parallel-machine scheduling with fractional operator requirements, lie, Vol. 26, No. 5, pp.56-65.

Bruco, M.J. et Jacobs, L.W. (1998). Personnel tour scheduling when starting-time restrictions are present. Management Science 44, 538-547

Burn R.N. et Carter M.W. (1985). Work force size and single shift schedules with variables demands. Management Science, 31:599-607.

Burns, R.N. et Koop, G. J. (1987). A modular approach to optimal multiple-shift manpower scheduling. Operational research 35, 100-110.

Chen H.G., (1995). Operator scheduling approaches in group technology cells-information request analysis," Ieee Transactions on Systems, Man, and Cybernetics, Vol. 25, No.3.

Cheng, T.C., Wang G., Sriskandarajah C. (1999). One-operator-two-machine flowshop scheduling with set-up and dismounting times, Computers & Operations Research, Volume 26, Issue 7, pp. 715- 730.

Chen, H. G.(1995).Heuristics for operator scheduling in group technology cells, Computers Ops Res. Vol. 22, No 3, pp. 261-276.

Conway, R.W., Maxwell, W.L. and Miller L.W. (1967). Theory of Scheduling, Addison-Wesley, Reading, MA.

Cordeau, J.- F, Stoskovic G., Desrosiers J., Soumis, F. (2001). Benders decomposition for simultaneous aircraft routing and crew scheduling, à paraître dans Transportation Science.

Croci, F., M. Perona,, Pozzetti A. (2000). Work-force management in automated assembly systems, Int.]. Production Economies 64, pp. 243-255.

Dantzig (1954).A comment on Edie's traffic delay at toll booths", Operations Research, 2 (3), 339-341.

Desaulniers, G., Desrosiers, J., Garnache, M.et Soumis F. (1998). Crew scheduling in air

transportation. Fleet Management and Logistics, T.G. Crainic et G. Laporte (eds), Kluwer, Norwell, MA, 169-185.

Dondetti, R., Mohanty B. (1998). Impact of learning and fatigue factor on single machine scheduling

with penalities for tardy jobs, European Journal of Operational research, 105, pp. 509-524.

Emmons H. and Burns R. N.(1991) Off-day scheduling with hierarchical worker categories", Operations Research, 39 (3), 484-495, 1991

Emmons H. et Fuh D.,(1997). Sizing and scheduling a full-time and part-time workforce with off-day and off-weekend constraints, Annals of Operations Research, 70, 473- 492.

Crabot, B., Letouzey A. (2000). Short-term manpower management in manufacturing systems: new requirements and DSS prototyping, Computers in Industry, Volume 43, Issue 1, pp. 11-29.

Hung, R. (1994). Single-shift off-day scheduling of a hierarchical workforce with variable demands" European Journal of Operational Research Vol.78, pp.49-57.

Jacobs L.W. et Brusco M.J. (1998). Personnel tour scheduling when starting time restrictions are present. Management Science, 44:534-547.

Janiak A., Kovalyov M.Y. et Portmann M.C. Single machine group scheduling with resource dependent setup and processing times. European Journal of Operational Research Article in Press.

Kher, H.V. (2000). Examination of worker assignment and dispatching rules for managing vital customer priorities in dual resource constrained job shop environments, Computers & Operations Research 27, pp.525-537.

Lavoie. S., Minoux M., Odier E. (1988). A new approch of crew pairing problems by colurnn generation and application to air transportation. European Journal of Operational Research, 35, 45-58.

Lee, T. (2002). The effect of workers with different capabilities on customer delay, Computers & Operational Research ( article en presse).

Mosheiov, G. (2001). Scheduling problem with a learning effect. European Journal of operational research (2001) 132, pp 687-693.

Mosheiov, G., Sidney J. (2003). Scheduling with general Job Dependant learning curves, European Journal of Operational Research ta appear.

Ng C.T.D., Cheng T.C.E, Kovayov M.Y., Lam S.S. (2003). Single machine scheduling with a variable comrnon due date and resource-dependent processing times. Computers & Operations Research Volume 30, Issue 8, July 2003, Pages 1173-1185.

Omari, Z. (2002). Attribution des activités aux employés travaillant sur des quarts. Mémoire de

maîtrise, École Polytechnique de Montréal, Canada.

Pinedo, M. (1995). Scheduling theory algorithms and systems, prentice hall, englewood cliffs, New Jersey.

Rekik, M., J.-F Cordeau, F. Soumis (2002). Using Bender decomposition to implicitly model tour scheduling .Les Cahiers du Gerad, ed. Montrea.l

Schindler S. et Semmel T. (1993). Station staffing at Pan American Word Airways. Interfaces, 23:91-98.

Sule D.R.(1997). Industrial scheduling. PWS Publishing Compagny, ISBN 0-534-95456-1.

Tien J., et Kamiyama A. (1982). On manpower scheduling algorithms. SIAM Review 24, 275-287.

Thompson, G.M. (1995). Improved implicit optimal modeling of the labor shift scheduling problem.Management science 41, 595-607.

Vairaktarakis, G. L.,. Cai X., Lee C. Y. (2002). Workforce planning in synchronous production systems. European Journal ofOperation Re search 136, pp. 551-572.

Vatri, E. (2001). Intégration de la generation des quarts de travail et de l'attribution d'activités. Mémoire de maîtrise, École Polytechnique, Montréal,

Vairaktarakis G.,. Lee X.Q. (2000). Workforce Planning in Synchronous Production Systems. European Journal of Operations Research, Accepted, 2000.

Vembu S., Srinivasan G. (1997). Heuristics for operator allocation and sequencing in product-linecells with manually operate machines. Computers ind.vol.32, No.2, pp.265-279.

Wagneur, E., Chelliah S. (1998). Flow-shop scheduling in the metal industry IEEE Conference on Contrai Applications - Proceedings, 2, pp. 925-929 Proceedings of the 1998 IEEE International conference on Control Applications. Part 2, Trieste, Italy.

Téléchargements

Publiée

01-06-2004

Comment citer

Tchommo, J. L., Baptiste, P., & Soumis, F. (2004). Etude bibliographique de l’ordonnancement simultané des moyens de production et des ressources humaines. Revue Française De Gestion Industrielle, 23(2), 85–98. https://doi.org/10.53102/2004.23.02.520

Rubrique

Article

Statistiques

Vues: 61
Téléchargements: 45

Articles les plus lus du même auteur ou de la même autrice